Main Slide Show
Workplace Safety & Health Company IH consultants are trained to inventory and assess confined spaces of various types and sizes.
Industrial Hygienists may wear Hazmat or other chemical protective clothing when evaluating highly hazardous atmospheres or environments.
An IH consultant uses sound level meters to assess noise levels in industrial environments.
Industrial Hygienists place noise dosimeters on factory employees to monitor employee exposure to noise levels.
Lockout/tagout involves assessing a machine’s operation and identifying all energy sources.
Tagout of electrical switches in a control room warns employees not to start equipment.
An Industrial Hygienist uses an X-Ray Fluorescence (XRF) analyzer to determine lead-based paint concentrations on a facility’s exterior.
We do air sampling for airborne contaminants using sorbent tubes.
Industrial Hygienists use a filter cassette equipped with a cyclone to collect respirable dust samples.
The International Safety Equipment Association (ISEA) recently released an updated version of its Personal Fall Protection Equipment Use and Selection Guide. The guide provides guidance for fall protection users and administrators in selecting, using, maintaining and inspecting fall protection equipment.
The document is prepared by manufacturers in the ISEA Fall Protection Group and describes the process of developing a corporate fall protection program, explains the components of fall protection systems, provides examples of how to select equipment for various types of work, and outlines steps for planning the use of fall protection systems. The guide also contains inspection and maintenance guidelines, definitions, a list of applicable OSHA regulations and U.S. and Canadian consensus standards, and links to ISEA companies and other sources of information.
Read entire article - https://safetyequipment.org/wp-content/uploads/2017/05/FPUserGuide2017.pdf